Industrial Multiple PLC Trainer / Industrial PLC Trainer

Description

Our  Industrial Multiple PLC Trainer/ Industrial  PLC Trainer (FT-MP011) has been designed with latest modules for students to get an overall understanding of industrial situations. With this Multiple PLC Trainer they can learn how to program, interface and implement different industrial scenarios using all known brands of PLC. This would enable students to get a real taste of fixing, troubleshooting and implementing industrial machinerie’s electrical and electronics system.

Main Structure:
Main Structure Aluminium Profile structure for Table Setup of Hanging
AC Power : 1 Phase 220V AC/ 50Hz
DC Power Supply 5V,12,24V
1 Working Table
3 Step Working Fram
2 Storage Cabinet
1 ElectricAccessories Storage Cabinet
1 Air Compressor
Air compressor power: AC 220V±10% 50Hz/60Hz
motor power: 600W, Nominal volumeAir compressor: 9L
normal output voltage 0.7 MPa, noise degree: 66 dB
Dimension :1735 x 700 x 1660: L x W x H (mm)
Connection facility 2mm & 4mm Safety Socket

Siemens PLC
Model Number: 6ED1052-1MD00-0BA8
Programming Language: Ladder, Functional Flow Chart Diagram
Built in Ethernet communication
PLC Power supply: 1 No.
PLC Digital Input: 08
PLC Analog Input: 04 Nos
PLC Analog Output: 02 Nos
PLC Digital output: 04
PLC Display Unit: YES
PLC Input Voltage: 24VDC, 1Amp
Permissible range, Lower limit (DC): 20.4V
Permissible range, Upper limit (DC): 28.8V
Programming Software: LOGO Soft Comfort or equivalent
Programming Cable: PLC to PC communication Cable
Connection facility 2mm & 4mm Safety Socket Module
Dimension: LxWxH (cm): 29.5 x 22.5 x 4.5

Mitshubishi PLC
Model Number: FX3U-16MR-DS
Power Supply: 24 VDC
Input Types: 24 VDC
Output Types: Relay
Communication Options: RS-232 ? RS-485, RS-422, SB
CPU Functions: High peed counters, 32 bit floating point math
Program Memory Byte (Step): 128 K max. (64,000) or higher
Ambient Temperature: 0-55° C (in operation) -20 ±70° C (in storage)
Ambient Humidity: 5-95% RH, no condensation (in operation)
Noise Immunity: 1000 Vpp noise voltage, 1 s pulse width at 30-100Hz
Digital Input: 8
Digital Output: 8 (Relay)
Programming Software: Gx-Developer or equivalent
Programming Cable: SC-09 or equivalent
Connection facility 2mm & 4mm Safety Socket Module
Dimension: LxWxH (cm): 29.5 x 22.5 x 4.5

Fatek PLC
Model Number: FBs-14MAR
PLC input: 8 points Digital
Triggering Power: 24VDC
(2 points high speed 100KHz,
2 points medium speed 20KHz,
4 points medium speed total 5KHz)
PLC Output: 6 points relay
Communication Port: RS232/USB
Built-in power supply: SPW14-AC/D12/D24
Connection facility 2mm & 4mm Safety Socket Module
Dimension: LxWxH (cm): 29.5 x 22.5 x 4.5

Omron PLC
Model Number: CPM1A 30CDR A V1
Power Supply: 220VAC
Triggering Voltage: 24VDC
Digital Input: 18
Digital Output: 12(Relay)
Programming Cable: PLC to PC communication Cable
Connection facility 2mm & 4mm Safety Socket
Dimension: LxWxH (cm): 29.5 x 22.5 x 4.5

Delta PLC
Model Number: dvp10ec00r3
Power Supply: 220VAC
Triggering Voltage: 4VDC
Digital Input: 06
Digital Output: 04(Relay)
Programming Cable:
PLC to PC communication Cable
Connection facility 2mm & 4mm Safety Socket
Dimension: LxWxH (cm): 29.5 x 22.5 x 4.5

LS PLC
PLC Brand- LS (LS Industrial System)
Model number: XBC-DR30SU
Power Supply: 220 V AC
Digital Input: 18
Digital Output: 12(Relay)
Triggering Voltage: 24VDC
Programming Cable:

Allen Bradley PLC
Parts No: Micro820
PLC Digital Input:12 Nos
PLC Digital Output:07 Nos
PLC Analog Input:04 Nos
PLC Analog Output:01No
20-point controllers
Provides embedded 0…10V non-isolated 4 channel analog input
and 1 channel analog output for speed control of an AC drive
Provides embedded communications via non-isolated serial port
(for RS-232 and RS-485 communications) and Ethernet port
Communicates via EtherNet or IP
Provides embedded microSDTM slot for program transfer,
datalog, and recipe management
Provides embedded support for up to four 10k thermistor
temperature inputs
Supports program download through USB with an optional 3.5-in.
Remote LCD
Supports up to two Micro800 Plug-in Modules
Programming Cable: PLC to PC communication Cable
Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Schneider Electric PLC
Parts: SR3B101BD or AFPX-C40R
Built in display: LCD
High-speed Operation
Number or control scheme lines
Maximum Number of I & O Points:
0…500 with FBD programming
0…240 with ladder programming.
Cycle time : 6…90 ms
Backup time : 10 years at 25 degree C
Checks : Program memory on each power up
Supply voltage limits : 19.2…30 V
Discrete input voltage : 24 V DC
Discrete input current : 4 mA
IP degree of protection : IP20 (terminal block) conforming to IEC 60529
Mechanical durability : 10000000 cycles (relay output)
Output thermal current : 8 A for all 4 outputs (relay output)
Number of outputs : 4 relay output(s)
Discrete input number : 6 conforming to EN or IEC 61131-2 type 1
Programming Cable: PLC to PC communication Cable
Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Wecon PLC 
Parts: LX3V-0806MR-A2
Power Supply=220VAC
Digital Input=8
Digital Output=6 (Relay)
Triggering Voltage:24VDC
Programming Cable: PLC to PC communication Cable
Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45
Programming Cable: PLC to PC communication Cable
Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

PLC Pick & Place using Pneumatic Air Suction Module 
Base Plate: Aluminum Profile
Structure: Aluminum Profile
Function Indicator: Tower Type (Red, Green, Yellow)
Carry Function: Using Air suction method
Pneumatic cylinder: 02 Pcs
Optical Fiber Sensor:02 set
Solenoid Vaulve:3 pcs
Cabinet control circuit power supply: DC24V
Temperature: -10 to 40 ; Humidity: getter than or equal 90 percent;
Air pressure: 0.4 to 0.6Mpa
Input power : single-phase, three-wire AC 220V(plus minus)10
percent 50Hz or 60Hz
Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):600 x 460 x 20

PLC Pick & Place using Pneumatic Gripper Module
Base Plate: Aluminum Profile
Structure: Aluminum Profile
Function Indicator: Tower Type (Red, Green, Yellow)
Carry Function: Using pneumatic gripper method
Pneumatic cylinder: 02 Pcs
Optical Fiber Sensor:02 set
Solenoid Vaulve:3 pcs
Cabinet control circuit power supply: DC24V
Temperature: -10 to 40 ; Humidity: greater than or equal 90percent ;
Air pressure: 0.4 to 0.6Mpa
Input power : single-phase, three-wire AC 220V plus minus 10
percent 50Hz or 60Hz
Connection facility 2mm & 4mm Safety Socket
Module Dimension : L x W x H (mm):600 x 460 x 20

Water Pump Control Module
Base Plate: Aluminum Profile
Water Chamber: Upper And Lower
Water through: Solenoid Valve
Water Pump: 5W
Operating Voltage : 24VDC
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension : L x W x H (mm):600 x 460 x 20

Fire Indication System Module
Smoke Sensor
Interfacing PLC and DC power supply Connection facility
Interfacing facility With water level control Module
Operating Voltage : 24V
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Traffic Light Control Module
Built-in ,Green, Yellow, Red Indicator for interface PLC and DC
power supply Connection facility
Operating Voltage : 24V
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Pneumatics Control Module
Pneumatic cylinder: 3EA
Temperature: -10 to 40 ;
Humidity: greater than or equal 90 percent ;
Air pressure: 0.4 to 0.6Mpa
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Pneumatics Solenoid Valve Module
Pneumatic solenoid valve: 3EA
Operating Voltage : 24V
PLC connection point : 3EA
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45
Interfacing facility Pneumatic control Module

Relay Control Module
Double pole Double Through Relay: 04 Set
Relay Operating Voltage:24V
PLC Connection facility 2mm & 4mm Safety Socket

Motor Starter module
Magnetic Contact switch:02 nos
Star Delta Status Indication facility
Relay Operating Voltage:220V to 240VAC
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Input Switch Module:
Pushbutton Switch:04 Nos
Relay Operating Voltage:24VDC
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Sensor module
Proximity Sensor: 02 Nos
Photo Sensor:02 Nos
Thermocouplar:02 Nos
Operating Voltage:24VDC
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Output Indicator Module:
Output Indicator:04 Nos
Operating Voltage:220V~240VAC
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Seven Segment Display module
Seven Segment Display:02 no
Input Operating Voltage:5V & 12V
PLC Connection facility 2mm & 4mm Safety Socket
Module Dimension :L x W x H (mm):295 x 225 x 45

Experiment List:
– The constriction of nine dierent categories PLC.
– Interfacing method of nine dierent categories PLC. – Programming method of nine dierent categories PLC.
– Pick & Place using PLC & Pneumatic Air Suction method.
– Pick & Place using PLC & Pneumatic Gripper method.
– Water Pump Control using nine dierent categories PLC.
– Fire Indication System using nine dierent categories PLC.
– Trac Light Control using nine dierent categories PLC.
– The constriction of Pneumatic cylinder.
– Sequential control of three Pneumatic cylinder using nine dierent categories PLC.
– The constriction of Pneumatic solenoid valve.
– Control of Pneumatic solenoid valve using PLC.
– Interfacing of PLC & Pneumatic solenoid valve.
– The method of Control Relay using PLC.
– The methods of three phase Induction Motor Starter using PLC.
– Forward-and-reverse operation methods of three phase Induction Motor.
– The method of interfacing PLC with Input Switch.
– The method of interfacing PLC with Input Sensor.
– Operating method of interfacing proximity sensor with PLC.
– Operating method of interfacing photo sensor with PLC.
– Use of Variable Frequency Drive with PLC.
– Programming method of Variable Frequency Drive with PLC.
– The construction of Three Phase Induction motor.
– Interfacing Method of Three Phase Induction motor with VFD & PLC.
– The construction of Stepper Motor.
– Interfacing Method of Stepper Motor with PLC.
– The construction Seven Segment Display.
– Interfacing Method of Seven Segment Display with PLC.
– Interfacing Power Supply with nine dierent categories PLC

Power Supply Module
Input Operating Voltage:220V~240VAC
Output AC Voltage:220V,50Hz
Output DC Voltage:5V(1Amp),12V(1Amp),24V(1Amp)
PLC connection point facility 2mm and 4mm Safety Socket
Fuse for Safety protection facility

Accessories:
Air Compressor-01 no
Connecting jack 2mm & 4mm : 01 Set
Power Cable: 01 no
PLC to PC Communication cable: 09 Sets
Simulation software for compatible PLC
English Manual & CD: 01 Set