Solar Power Generation Trainer

Description

Solar Power Generation Trainer

Technical Specification :

1. Self-contained solar cell trainer
2. Adjustable solar irradiation and azimuth for sunlightsimulation
3. Equipped with DAQ is advantageous to acquireand save the
experimental data
Specifications:
Solar Cell Base
1. Solar Cell Modules
(1) 4 pcs of monocrystalline silicon solar cell 6*12 cm-10cm×18cm
(2) Each solar cell unit:
a. Open circuit voltage (Voc): 1.5V
b. Short circuit current (Isc): 2.3A
c. Maximum load voltage (Vpm): 1.5V
d. Maximum load current (Ipm): 2.2A
e. Maximum power (Ppm): 1.1W
f. Efficiency (Eff): 15%
2. Dimmer
(1) Adjust the brightness of halogen lamp:
a. Input voltage 110VAC or 220VAC
b. Output voltage 12V
3. Light Source
(1) Halogen lamp 12V / 50W
(2) Beam angle 60°
Solar Cell Module:
1. Digital Multimeter x 2
(1) DC Voltage: 400mV, 4V, 40V, auto range, Inputresistance ≥ 10MΩ
(2) AC Voltage: 400mV, 4V, 40V, auto range, Inputresistance ≥ 10MΩ
(3) DC Current: 400μA, 400mA,10A, push buttonselector switch
10A Range: 10A/250V fuse protected, mA/μARanges: 0.5A / 250V fuse
protected
(4) AC Current: 400μA, 400mA,10A, push buttonselector switch, 10A
Range: 10A/250V fuseprotected, mA/μA Ranges: 0.5A/250V fuse
protected

(5) Resistance: 400Ω, 4K Ω, 40K Ω, 4M Ω, 40M Ω,auto range
(6) Diode test: 0~1.5V
(7) Continuity: Buzzer for the measured resistance <30 Ω
(8) Display: 3 ¾ digit LCD, max. indication 3999
2. Energy Storage
(1) NiMH rechargeable battery 1.2V / 80mAh
(2) Super capacitor 10F / 2.7V
3. Load
(1) DC motor:
(2) Light bulb: 1.1V, 300mA
(3) Potentiometer: 100Ω, 10-turn
4. Inverter
(1) Input voltage: 2VDC
(2) Output:
a. Modified sine wave 1Vpp 50/60Hz
b. Square wave 2Vpp 50/60Hz
Power Supply:
1. Input voltage 110/220 VAC
2. Output voltage 15VDC
DAQ with Software:
1. Channel 1 and 2: max. input voltage ±5V
2. Channel 3 and 4: max. input current 1A
3. DAQ type: Windows XP / Vista / 7 / 8
4. System requirement
(1) PC: 1GHz or faster 32-bit (x86) or 64-bit (x64)processor, 1GB
RAM, 1GB more free disk space
(2) OS: Windows XP / Vista / 7 / 8
List of Experiments:
Measuring the irradiation of various light sources
Energy conversion of solar cells

Diode characteristic of a solar cell
Effect of light-sensing area on the open-circuitvoltage of solar cell
Effect of light-sensing area on the short-circuitcurrent of solar cell
Effect of irradiation on open-circuit voltage andshort-circuit current
of solar cells
Relationship between the angle of irradiation andthe short-circuit
current of solar cell.
Open-circuit voltage and short-circuit current ofsolar cells
connected in series-shading
Open-circuit voltage and short-circuit current ofsolar cells
connected in parallel-shading
I-V curve of solar cells
Conversion efficiency and Maximum Power Point(MPP)
Simulating a daily course of sunlight
Charging a capacitor with solar cells
Capacitor discharging
Constructing a solar power island system
Inverter
(1) Operating with DAQ
(2) Measuring range 10~1200W/m²
-5. 25% Shading plate
-50% Shading plate-
-75% Shading plate-
-100% Shading plate
Solar Power Meter
Display: 3 ½ digit LCD, max indication 1999
Measuring range: 2000 W/m, 634 Btu/ (ft x h)
Resolution: 0.1 W/m, 0.1 Btu/ (ft x h)
Accuracy: ±10 W/m, ±3 Btu/ (ft x h)
Sampling rate: 2 Hz
Safety & Security: Over voltage, over current andearth fault
protection

Accessories :
Test leads: 1 set
Experiment manual
Instructor’s manual
Basic solar power meter

Others :

Parts Origin: China, Taiwan, Japan
Manufacturing: Assemble in Bangladesh
Installation
Warranty: 01 year