All Industrial Motor Control System (Stepper, Servo & Induction)

MOd :ft- mc05a

The All Industrial Motor Control System (Stepper, Servo & Induction) is a robust training platform designed for comprehensive hands-on learning in industrial motor control. It includes components for servo drives, AC servo motors, stepper motors, and both single-phase and three-phase induction motors. The system is built with high-quality materials and safety features like safety breakers and protection systems. It supports detailed power monitoring and various control methods, providing an extensive and practical learning experience in industrial motor control and automation.

Description

All Industrial Motor Control System

(Stepper, Servo & Induction)

Technical Specification :

Best type Printed Sheet , Hard Round support board or Plastic
Sheet , Safety Breaker, Protection System
Panel Box , Best structure. , Power Monitoring , Use Connector
Motor1× SDF08NK8 Servo Drive
1× 1KW 80F-0330TBL-Z AC Servo Motor with brake
1x DB25 hole plug and shell
1 x 3m Power Cable with Plug
1 x 3m Encoder Cable with Plug
Power: 1KW
Number of poles: 5
Rated power supply: 220V
Rated speed: 3000r/min , Rated torque: 3.18Nm
Rated current: 5.4A , With brake: Yes
Parameters of the driver
Maximum current: 8.9A , Input voltage: AC170-253V (50/60Hz)
Cooling method: radiating air cooling
Control mode: SVPWM control , Encoder: 17-bit single-turn
absolute value optical encoder , Operating temperature: 0℃~+55
℃, Storage temperature: -20℃-80℃, Protection level: IP54
Industrial Stepper Motor (Close Loop) Stepper Motor:
Low noise. , Low heat. . Smooth operation.
Good acceleration performance. .
Type: DSP Closed loop stepper drive , Maximum peak current:
13A . Impulse response frequency: 200KHz

Micro-stepping driver: 200~25600ppr , Input Voltage: 24-80VDC
Protective function: Over voltage, over current, tracking error,
over proof
• Signal input: Support PUL/DIR and CW/CCW modes (difference)
• Compatible : 4.5~28V signal (Don’t need a resistor)
Flange:NEMA23 57MM • Step angle: 1.8 degree • Phase: 4PH
Hold torque: 6NM • Motor Length: 132MM
• Rated Speed: 1000RPM • Encoder: 1000line
• Resistance: 0.65ohm • Inductance: 4.5mH
• Class of insulation:
Industrial Induction Motor (Single Phase):
Energy Efficient , Continuous running duty ,Sealed ball bearing •
Class F insulation , Dual enamelled copper wire ,CSIR/CSCR
models , MCB & thermal protection in 100S series , Easy change
direction of rotation ,High starting torque , 230 V & 415V supply
and 50 Hz frequency , Speed – 3000 RPM ,Increased Efficiency
Vacuum Pressure Impregnation treated , ‘F’ Class Insulation
Totally Enclosed fan cover
Industrial Induction Motor (Three Phase):
Energy Efficient , Continuous running duty , Sealed ball bearing
Class F insulation , Dual enameled copper wire, CSIR/CSCR
models , MCB & thermal protection in 100S series , Easy change
direction of rotation , High starting torque, Number of Pole: 4 ,
230 V & 415V supply and 50 Hz frequency , Speed – 3000 RPM
Power 1.5KW

Number of Cable: 7.5 HP ~ 6 WIRES(Star Delta Starting)
Increased Efficiency , Vacuum Pressure Impregnation treated
‘F’ Class Insulation
Totally Enclosed fan cover Thermal Printed Front pate
Size (42*34*6) inch, • Thickness: 21Gauge • Metal Type: SS &
MS, Print Colour: white Glazy, • Sheet number 22, • Storage
Printed temperature 3000c, • Color White/Silver
Machine Structure (Table & shelve type):
Size: 40Inch*32Inch, • SS & MS metal • Thickness: 18-gauge ¾
pipe, Number of Partition: 10
Multi section Back Cover Box (8mm):
Size (42*34*5) inch, Thickness: 8mm Metal Type: Acrylic
Color: Black & Blue.
Panel Meter (Voltage):
Meter Type: Digital ,Current Range: (0-1000) V, Print Colour:
white & Black. • Display Type: 7-Seg
Display Colour: RED & Blue
Panel Meter (Ammeter):
Meter Type: Digital , Current Range: (0-200) A, Print Color: white
& Black. , Display Type: 7-Seg , Display Color: RED & Blue
Panel Meter (Watt):
Meter Type: Digital ,Wattage Range: (0-2000) Watt, Print Color:
white & Black. , Display Type: 7-Seg ,
Display Color: RED & Blue
Earth leakage Safety Breaker:
Human Body Sense safety , Current error detection range is 20mA
Soft tripping , Low noise cut off
K. Printed Circuit Board for Motherboard Specification:
Type: Glass Fiber , Number of layers: 2 , Top silk Color: White
Green Masking Color: Blue
Gold type Connector with MM & MF Silicon Cable:
Cable type soft silicon , Current rating 100A ,
Voltage range 1000V , Female Connector Diameter 13mm , Male
Connector Diameter 4.5mm
Controller: DXP14XX211D:
Memory Flash: 128 MB , Memory RAM: 64 MB ,
Processor: 32Bit RISC CPU 400MHz ,
DC24V current output: 400mA ,
Product Series: DXX Series
Number of Inputs: 12
Input Type: Digital
Number of Outputs: 6Transistor Output
6 Analog Input , 4 Analog Output
Communication System: Serial , standard MODBUS ASCII / RTU
Integrated high-speed counter: 20Khz, Output Type: TTL
Isolated I/O Exchange Control Touch Panel:
Panel size: (30x18x10) Inch. , Display Type : LED ,
Display Size : 154.08 x 85.92mm , Operation System: Delta
Real-Time OS MCU: 32-bit RISC Microcontroller ,
SD RAM: 64Mbytes
Buzzer: Multi-Tone Frequency 2K ~ 4K Hz 85dB
Backlight: LED , Operation Voltage : DC +24V
Brightness (cd/m2) : 300
Contrast Ratio : 500:1
Backlight Type : LED
Backlight Life Time : >30,000 hrs. • Colors : 16MLCD
Viewing Angle (T/B/L/R) : 70/50/70/70

Type : 4-wire Resistive Type
Accuracy : Active Area Length(X)±2%, Width(Y)±2%
Power Management System:
Type: SMPS MODE , Primary Output Voltage: 24V
Output Current: 14.6A , Maximum Output Power: 350W
Family: LRS-350 , Input Voltage: 90V to 132V, 180V to 264V
Input Frequency: 47V to 63V , Maximum Input Current: 6.8A
Output Connector Type: Screw Terminal Block
Number of Outputs: 1 , Product Type: AC to DC Power Supply
Agency Approvals: UL/CUL ,Efficiency (%) : 88
Minimum Isolation Voltage: 3000V
Operating Temperature-Min (Cel): -25 , Operating Temperature-Max (Cel): 70 , Length (inch): 8.5
Relay Module:
Coil Voltage: DC 24V & 220V
Contact capacity: AC: 10A 220V
Matching sockets available
Contact resistance (mΩ): ≤50mΩ
Insulation resistance (mΩ): ≥500mΩ
Electrical life (OPS):100,000 times
Mechanical life (OPS):10,000,000 times
Operating temperature: -40+70℃
Proximity Sensor (NPN & PNP):
Outward appearance code:12mm
Outward appearance code: Metal shell
Detection distance: 4mm
Working voltage: DC 6-36V
Polarity: NPN/ NPN
Dimension: 12 x 50mm
Photo Sensor (NPN & PNP):
Voltage: DC 6-36V
Current: 300m
Head Diameter: 1cm/0.4“ , Body Size: 2 x 6cm/0.8“ x 2.4“
(Max. D*L), Material Plastic, Alloy
Magnetic Contactor:
Coil ratings: Characteristics for 200 VAC, 50 Hz / 200-220 VAC,
60 Hz
Coil power consumption value is the same for a coil that is
not rated 200 VAC.
Indicated operate/release times for 200 VAC, 50 Hz.
Closed and open voltages of 100 V coil (100 VAC, 50 Hz/100-110
VAC, 60 Hz) are approximately one half the values in the table
above.
Coil Current 100mA @ 22oVAC
Continuous Chanel current @ 30A
Values in the table above are examples for 20°C cold condition.
Others:
(Cable, Nut bolt/Screw, Indicator, Switch, Holder, Power Cord,
Rocker Switch, MCB, MCB box, Connect Lax, Cable tie, Reign,
Lead, Plug, Socket, Fuse Holder, Masking Tape, Electric Tape,
Rubber Bush, MK Socket, CT, Terminal Connector, Glugum/Stick
etc)
Aluminum Chanel:
Sheet thickness 5mm • Sheet (Silver/white) • Square Shape

Accessories : 
Standard accessories.
User manual: 1 Nos.
Connecting Wire: 1 set

Others :
Origin Parts : China, Taiwan, Japan.
Manufacturing in Bangladesh.
Warranty: 01 year.
Installation, Testing.
Training.

Related Products

× Chat With Us