Description

DC Motor Linear Control Trainer

Technical Specification :

Features:
A DC motor-based linear motion control system, which
should cover basic applications for programmable logic
controllers, DC gear motor control technology, and sensor
technology.
Should be a modular design, to be used as a separated
demonstration unit with a PLC system or programming unit.
Various linear motion positioning modes to be performed in
this system using different feedback elements, such as
proximity sensor positioning and rotary encoder positioning.
Training Content:
DC motor and reducer
Proximity sensor and rotary encoder
DC motor proximity sensor positioning
DC motor rotary encoder positioning
Technical Specifications:
Linear motion mechanism:
DC gear motor: DC 24V, 130 r/min
Ball screw: Effective travel 310 mm, lead 4 mm
Rotary encoder: Incremental, Resolution 720 P/R, 40-dia., 5
to 24 VDC, NPN open collector, pre-wired models
Proximity sensor x3: DC 6-36V, detection distance 2 mm,
three-wire NPN NO.
Limit switch: Quantity 2
Mounting frame: Aluminium profile for ball screw and
proximity sensor
Relay: Intermediate relay x2, DC 24V with relay seats
Power supply unit: AC 220V socket input, with three-way DC
24V output and short circuit protection

Indicators and buttons: Running, reset, and stop indicators and buttons with 2 mm sockets
Dial switch: 2-bit with 8421 BCD
Experiment box and panel: Complete frame made of
grooved aluminum profile, detachable upper cover with
transparent design. The panel should adopt an engraved
and printed panel.
Cable suite: 2 mm, conductor cross-section: 0.5 mm² SR
wire, 500V CATII, with axial socket
Manual: Programming and wiring sample should be
provided, together with schematic diagrams.
Universal PLC Control Unit:
Features:
This should be a universal programming logic controller
training system built on a portable aluminum alloy frame.
It should provide multiple connecting methods for both
input and output points.
All component terminals should lead out to 4 mm safety
sockets for clear education and easy operation purposes
by using banana cable sets.
Serial port and circular connector should be used to
realize fast connection with external application units.
This universal PLC system is to be used as the programming unit for different training systems.

Technical Specifications

Power supply:
Input power supply: 1 phase AC 220V ±10% with ELCB,
fuse protector, and seat.
AC 220V output: 2-way 1-phase output sockets with
cover, 2-way single-phase 4 mm output.
DC 24V output: 1-way DC 24V through circular connector, 4-way DC 24V 4 mm output with indicator.
Programming logic controller:
With all I/O leading to 4 mm sockets.
Programming languages: STL/LAD/FB
Siemens SIMATIC S7-200 SMART relay type
Digital input x12, digital output x8
Ethernet / RS485 communication with additional serial
port 85…264V AC, 47…63Hz
Frame and panel: Engraved and colorized printed panel,
standard aluminum profile frame structure
Power cord and connecting cable suite
Supplied with Licensed Pneumatics Simulation Software:
Licensed Pneumatic Simulation Software to be used for
conducting the following experiments:
Reversing loop of push button valve controlled single
acting cylinder
Speed control loop of single acting cylinder
Manual controlled reversing loop of hand directional
valve
Pneumatic controlled reversing loop of hand directional
valve
Speed control loop of double acting cylinder
Speed control loop of throttle valve
Sequential loop of two cylinders
Reversing loop of OR gate valve controlled single acting
cylinder
Remote controlled unloading loop
Push button valve controlled double acting cylinder loop
Reducing valve controlled pressure-relief loop
Two hands controlled single acting cylinder reversing
loop
Supplied with Licensed Hydraulics Simulation Software:
Licensed Hydraulics Simulation Software to be used for
conducting the following experiments:
Single stage pressure regulation loop of overflow valve
One level pressure-relief loop of reducing valve
Oil in speed regulation loop of flow control valve
Oil return speed regulating loop of flow control valve
Side oil line throttle governing loop of flow control valve
Reversing loop of hand directional valve
Series speed regulating loop of flow control valve and
throttle valve
Parallel speed regulating loop of flow control valve and
throttle valve
Oil in and oil return speed regulating and throttling loop

Accessories : 
Standard accessories.
User manual: 1 Nos.
Connecting Wire: 1 set

Others :
Origin Parts : China, Taiwan, Japan.
Manufacturing in Bangladesh.
Warranty: 01 year.
Installation, Testing.
Training.