Description
Basic Sensor Experimental Lab
Technical Specification :
Features:
Industrial-standard sensors and transducers with USB interface.
Open-ended design, ideal for expansion. Offer a sensing data
acquisition software. Specifications: Main Unit 1. Power Supply
Unit Fixed DC power supply Output voltage: +5V, -5V, +12V,
-12V. Max. output current: +5V:3A, -5V:0.3A, +12V:1.5A,
-12V:0.3A(3) with output overload protection.
AD Converter:
2. AD Converter:
1×12-bit ADC. Input voltage range: 0 to +5V.
Pulse frequency: 3.58 MHz Control signals: Status, pole, over
range indication.
Interface Port :
3. Interface Port USB interface : Type B. 4. D A Converter : 1 x
12-bit DAC Analog output & control OUT +: +DC OFFSET 0V
+4.096V unipolar OUT: -:DC OFFSET 0V – 4.096V unipolar.
OUT BP : DC OFFSET -2.048V +2.048V bipolar.
Status Display and DCV Input:
5. Status Display & DCV Input: voltage measurement. Range : 2000mV, 20V. Accuracy : ±0.0 of
reading + 4 counts. Input impedance: 10M Ω. 6.
Display : 4 digits. 7. Model Selector Manual or
single-chip. 8. Buzzer.
Microcontroller Signals :
9. Maximum input signal voltage: +12V. Microcontroller Signals 5. Control line outputs 10.
Model Holder: X4.11. Potentiometer: 100 ohm
B-type. 12. Comparator V+, V+ input, Vo output
13. Differential amplifier V+, V+ input, Vo
output, adjustable gain.
Modules :
module 1 : sing 2mm plugs and sockets . comprehensive experiment manual.
Module 2 : secured in plastic housings. 14.
Connected by 2mm-2mm test leads
15. Dimension: 255 x 165 x 30mm. Circuit
symbols, blocks, and components printed on the
surface of each module. Power supplied from
KL-6101B main unit
15. Dimension: 255 x 165 x 30mm. Circuit
symbols, blocks, and components printed on the
surface of each module. Power supplied from
KL-6101B main unit.
Vibration Switch :
16. Vibration switch. 17. Condenser microphone
Module-4. 18. Dynamic microphon Module-4. 19.
Gas smoke sensor. 20. Ethanol sensor Mod-
ule-51. IC (AD590) temperature sensor.
Humidity Sensor:
21. Humidity sensor (1) Humidity transducer rated
voltage: 1 Vp-p AC(2) Frequency range: 100Hz to
10KHz(3) Temperature range : 0 to 60 C. 24.
Humidity range: 0 to 20% percentage RH to 90%
percentage RH. impedance : 13k oham (70
percentage RH at 25C.
Infrared TX or RX Sensor :
25. Infrared TX or RX sensor (1) Infrared transmit-
ter: Emission intensity: 12mW sr (I = 50mA). Emis-
sion wavelength: 940nm (IF = 50mA). Infrared
receiver: Sensitivity wavelength: 1000nm.
Ultrasonic TX or RX Sensor :
26. Ultrasonic TX or RX sensor Normal frequency:
40kHz Module-71. Pressure sensor 0-7 psi to 0-30
psi pressure ranges. 28. Strain gauge(1) Maxi-
mum payload: greater5kg (2) Terminal resistance:350 ± 50Ω
Maximum Payload:
29. Module-8. 30. Hall current sensor (1) Nominal
current : ±3A (2) Current range : ±9A.
Output Voltage :
31. Output voltage: ±4V, REL equal 10 k Ohms.
32. Proximity sensor (1) Operation voltages: 10 to
30V DC List of Experiments 1. D.A. and AD
Converters. 2. Characteristics of Sensors. 3. Gas
Sensor. 4. AD590 Temperature Transducer. 5.
hall current sensor6. PT100 temperature sensor 7.
Strain Gauge : 33. Strain Gauge. 34. Linear
Variable Difference Transformer (LVDT). 35.
Photovoltaic Cell. 36. Proximity Switch. 37. Infra-
red Transducer. ultrasonic transducer.
Pressure Sensors :
38. Pressure Sensors. 39. VF and FV Converters. 40.
CdS Cell. 41. Fiber Optical Communication. 42. Rotat-
ing Angle Sensor.
Computer Specifications :
Motherboard : Supportive for intel core i7-14700k.
memory type : DDR5. memory slot-4 (at Least-12 GB)
Stroage Slot 4, wifi 6 built, intregrated with external
graphic card, Ram : 16GB (DDR-5 Type).
43. Brand PC-Processor: Intel Core i7-14700K (14th
Generation), (33MB CPU Cache, 4.5GHz Base up to
5.6GHz). DDR4 & DDR5 Memory Type CPU Cooler –
supportive for Intel Core i7-14700K . processor (cooler
type liquid, cpu cooler of fans – 3 at least. fan speed
1500 RPM to 2000 RPM.
Memory and Display :
44. Memory: 16GB (DDR5-Type, Bus Speed-6000MHz
to 8000MHz). Storage: SD: 1TB at least (with
GDDR5-Memory Type). Graphics Card: External
Graphics Card at least 8 GB, Memory type-GDDR6,
Graphics Resolution -Quad Display (7680 x 4320).
Monitor and Accessories :
45. Monitor at least 23.8-inch, Display Resolution:
1920×1080 (W x H) FHD, Refresh rate-100 Hz (at least)
OS Windows 10/11 (Genuine Version) Mouse &
Keyboard- Supportive mouse & keyboard.
Accessories :
Experimental manual
Connection leads and plugs: 1 set
Storage Cabinet – 2 Sets
Connecting Wire: 1 set
User Manual: 1 Nos
Standard Accessoriess
Others :
Origin Parts : China, Taiwan, Japan.
Manufacturing in Bangladesh.
Warranty: 01 year.
Installation, Testing.
Training.
