Description

AC/DC generator model for Demonstration

Technical Specification :

Material Mental & Plastic
When the rotor speed is 1600 rpm Output voltage of the
machine: no-load voltage is not less than 8V; 4.8 V, 0.3 a
small bulb is connected in series, and the load voltage is not
less than 5 V.The product is composed of base, lamp holder,
hand wheel, magnetic block, armature, pole shoe, brush,
collector ring, bearing frame, conversion connecting piece,
terminal post, etc.
Product feature and application
This machine is used to demonstrate the basic structure and
work of AC / DC generator for Physics Teaching in middle
school and natural knowledge teaching in primary school.
Maintenance and precautions
Most of the faults of this instrument are loose and broken
wires (due to moisture and corrosion). Therefore, such as:
If the shaking fails to generate power, use a multi-meter to
check whether the wire is disconnected.
The clearance between the armature and the pole shoe is
very small.If the bearing is loose, the armature is easily stuck.
At this time Check the cause and adjust the position of the
pole shoe and the bearing so that the armature can rotate
flexibly in the pole shoe. peacetime
Pay attention to proper lubrication of bearings.
3. The belt shall be protected from oil contamination
and high temperature. After use, the belt shall be
removed from the pulley to Prevent the belt from being
too loose and slipping.
4. the brush terminal should be insulated from the
support. If the screw is loose and short circuited, it
should be adjusted.

Accessories : 

Connecting Wire: 1 set
User Manual: 1
Standard Accessories

Others :
Origin Parts : China, Taiwan, Japan.
Manufacturing in Bangladesh.
Warranty: 01 year.
Installation, Testing.
Training.