Industrial Automotive Control Solution with Engineering Panel

Description

Specification:

Industrial automotive training solution with engineering panel.
Controlling Panel:
PLC 1Nos,
PLC Input 12,
PLC Output 8,
HMI 1Nos
7inch, Ethernet Communication must,
Ethernet Communication Cable 1Nos.
Temperature Controller with Sensor 1Nos.
Digital Timer 1Nos.
Digital Twin Timer 1Nos.
Digital Counter with Relay Controlling.
Photo Sensor (NPN & PNP) 3Nos.
Proximity Sensor (NPN & PNP) 3Nos.
8 Output Indicator & Pin out.
24V Power Supply.
Push Switch 8Nos.
PLC Input Pin out.
PLC Output Pin out.
Main Circuit Breaker.
Individual AC Circuit Breaker.
Individual DC Circuit Breaker.
AC Output Display & Indicator.
DC Output Display & Indicator.
Magnetic Conductor 8Nos.
Relay 8Nos.
Heavy metal Casing , Protective Enclosure with Lock.
Panel Dimension (Whole): 4.6ft x 6ft x 1ft.

Pick and Place Module:

-Double-Rod Aluminum Alloy Cylinder 1Nos.
-Actuator Air Gripper Cylinder 1Nos.
-Attached Guide and Speed Controller
Horizontal left, right sensing Auto switch
Vertical up/down sensing Auto switch.
Relay 3Nos
Human Machine Interface HMI
Display Type : 7″ TFT LCD
Resolution : 800 x 480 pixels,
Backlight : LED,
Display Size : 154.08 x 85.92mm,
Operation System : Delta Real-Time OS,
MCU : 32-bit RISC Microcontroller,
SD RAM : 64 Mbytes,
Buzzer : Multi-Tone Frequency 2K ~
4K Hz85dB,
Operation Voltage : DC +24V)
Air Compressor
Condition New, New
Type: PISTON, Piston
Configuration: PORTABLE
Power Source: AC POWER, AC Power
Lubrication Style: Lubricated
Working Pressure: 8 bar
Motor power: 0.75KW 1HP
Pressure: 8Bar 115P.s.i. 0.8Mpa
Type of the air compressor: Direct-driven
Heavy Metal Box.
Module Dimension: 28 inch x 20 inch

VFD:

1.5kw VFD (230V 1/3 Phase).
1/2 Horse Three Phase Induction Motor.
Three Phase Circuit Breaker
A potentiometer
Power Indicator

Pneumatic Sorting Module:

Conveyor belt motor (speed and directional control).
-3 Infrared beam sensors
-3 Electro-pneumatic valves
-3 Pneumatic single-acting cylinders
-3 Pneumatic cylinder position sensors
-2 Status indicator lamps
-2 Start/stop buttons
-7 Manual control input switches
-Heavy Rubber Belt
-Belt size 23×3 inch
-Heavy Metal Box.
-Module Dimension: 28 inch x 20 inch

Liquid Mixing Module:

-Water level sensor 10 Nos.
-Solenoid valve 4Nos.
-Water Pump 3Nos.
-Mixing Motor 1Nos.
-Input Connector 10 Nos.
-Output Connector 7Nos.
-Output Relay 8Nos.
-Mixing Tank 1Nos.
-Water Tank 3Nos.
-Pump Water Tank 3Nos.
-Aluminum body.
-24volt Power Supply 1Nos
-Selector Switch for ON/OFF 1Nos
-Push Button switch 2 Nos
-Pneumatic Fittings
-Dimension:34 inch by 30 inch 12 inch (HxWxL)

Conveyor Belt & Bottle Filling Module:

-Heavy Rubber Belt
-24 Volt Power Supply
-One DC Gear Motor
-Three Photo Sensor
-One Proximity Sensor
-Sensor Pinout
-Relay Output Pin out
-Four Relay
-Control Box
-One Solenoid Valve
-One DC Water Pump
-One Water tank
-Connecting Cable
-Acrylic Body
-Belt Size: 23 inch x 3 inch
-Module Dimension: 32 inch x 18 inch
Stepper motors
Temperature sensor
Light sensor
Potential dividers and their use
Transistors as switches
Use of relays
ECU action and function
Automotive control systems
Sensor and actuator waveforms and signals
Sensor and motor faults

Accessories:

Connecting Wire: 1 set
User Manual: 1 Nos
Standard Accessories

Others:

Country of Origin: China
Manufacturing: Assemble in Bangladesh
Training