Basic Sensor Equipment lab Trainer

Description

Basic Sensor Equipment lab Trainer

Technical Specification :

Sensor Main Unit
Power Supply Unit
Fixed DC Power Supply:
Output Voltage: +5V, -5V, +12V, -12V
Max Output Current:
+5V: 3A
-5V: 0.3A
+12V: 1.5A
-12V: 0.3A
Features: Output overload protection
A/D Converter
1x 12-bit ADC
Input Voltage Range: 0 ~ +5V
Time Pulse Frequency: 3.58 MHz
Control Signals: Status, pole, over-range indication
Interface Port
USB Interface, Type B
D/A Converter
1x 12-bit DAC
Preset Level
4-digit thumbwheel switch
Max Value: 4095
Status Display & DC Voltage Input Measurement
Range: 2000mV, 20V
Accuracy: ±0.05% of reading + 4 counts
Input Impedance: 10MΩ
Display: 4 1⁄2 digits
Mode Selector
Options: Manual / Single-chip
Buzzer
Max Input Signal Voltage: +12V
Microcontroller Signals
5 Control Line Outputs
Model Holder
Capacity: X4
Potentiometer
Resistance: 100KΩ B-type
Comparator
Inputs: V-, V+ , Output: V0
Differential Amplifier
Inputs: V-, V+, Output: V0
Instrumentation Amplifier
Inputs: V-, V+, Output: V0
Features: Adjustable gain
System Requirements
PC:
Processor: 1GHz or faster (32-bit x86 or 64-bit x64)
RAM: 1GB
Free Disk Space: 1GB or more
Operating System: Windows XP/Vista/7/8/10
List of Modules
Module 1:
Photo Transistor
Photo Interrupter
Digital Magnetic Detector
Analog Magnetic Detector
Module 2:
Pyroelectric Detector
Reed Switch
Thermistor
Mercury Switch
Module 3:
Limit Switch
Vibration Switch
Condenser Microphone
Dynamic Microphone
Module 4:
Gas / Smoke Sensor
Ethanol Sensor
Module 5:
IC (AD590) Temperature Sensor
Humidity Sensor
Humidity Transducer Rated Voltage: 1 Vp-p AC
Frequency Range: 100 Hz ~ 10 KHz
Temperature Range: 0°C ~ 60°C
Humidity Range: 20% RH ~ 90% RH
Impedance: 13 KΩ (70% RH at 25°C)
Module 6:
Infrared TX / RX Sensor
Ultrasonic TX / RX Sensor
Nominal Frequency: 40KHz
Module 7:
Pressure Sensor: 07 psi to 030 psi Pressure Ranges
Strain Gauge: Max Payload: < 5kg, Terminal Resistance: 350 ± 50Ω
Module 8:
Hall Current Sensor
Nominal Current: ±3A
Current Range: ±9A
Output Voltage: ±4V
Load Resistance (RL): 10K Ohms
Proximity Sensor
Operation Voltages: 10V ~ 30V DC
Short Circuit Protection
Module 9:
CDS Sensor
Photovoltaic Sensor
Photovoltaic Transducer Open Voltage: 2V
Photovoltaic Transducer Close Current: 0.06 µA/lx
Module 10:
V/F Converter
Input Voltage: +10mV ~ +10V
Output Frequency: 5Hz ~ 5KHz, 10Hz ~ 10KHz
Module 11:
F/V Converter
Input Frequency: 0 ~ 4.3KHz (±0.2Vp ~ ±5Vp)
Output Voltage: 0 ~ 4.3V DC
Module 12:
RTD (PT-100)
Resistance at 0°C: 100Ω
Resistance at 100°C: 139.16Ω
Rating: 250°C
Module 13:
Level (Water)
Simulation of the Reservoir Control Status (motor
included)
Module 14:
Fiber Optic Emitter
Forward Current, DC (IF): 50mA
Peak Wavelength: 950nm
Output Power: 50 µW
Fiber Optic Phototransistor
Peak Wavelength (λpeak): 850nm
Collector Current (IC): 50mA
Power Dissipation: 100mW
Module 15:
LVDT
Range: ±5mm
Scale: 0.01mm
Optimum Frequency: 50Hz ~ 1.1KHz (Nominal: 350Hz)
Module 16:
Rotation Angle Sensor
10 Turns (3600°)
Precision Potentiometer
Linearity: ±0.25%

Accessories :

Standard accessories.
User manual: 1 Nos.
Connecting Wire: 1 set

Others :

Origin: China.
Manufacturing: Assemble in Bangladesh.
Training.
Warranty: 01 year.