Description
Mechatronics Training System
Experiment Content :
PLC Programming
Pneumatic Control Circuits
Cylinder Speed Adjustment and Positioning
Cylinder Rotational Angle Adjustment
Handling Technology
Materials Sorting
Air Testing
Height Testing
Linear Potentiometer Property Analysis
A/D Converter Applications
Sensor Applications
Rotary Index Table Positioning
Stepper Motor Driving
Worm and Gear Mechanism
Drilling and Clamping Control
Drill Hole Checking
Industrial Safety Diagnostics
Conveyor Belt Drive Mechanism
Vacuum Chuck Handling
Workpiece Height Detection
Fiber Optic Sensor Applications
Solenoid Valve Operations
Double-Acting Cylinder Flow Control
Workpiece Sorting by Material Type
Drilling Depth Calibration
Technical Specification :
Base Plate: Aluminum ,Function Start,
Stop Switch & Emergency Switch
Conveyer Belt Size: Length- 585mm Width- 76mm,
Conveyor Belt Drive by Nema17
Stepper Motor Learning contents , Sensors ,
Mechanical automation, PLC program development,
Sequential control Installation diagnostic,
Pneumatic –Drives –Electronics -Industrial safety.
One PLC For Controlling All Six Station
A. Distributing Station:
Learning contents: PLC programming –
Pneumatic control circuits -sequential control,
Cylinder speed adjustment and positioning
Cylinder rotational angle adjustment
Handling technology ,
Industrial standard safety Main Component:
Structural composition: basal plate, electric control cabinet,
Operation panel, charging barrel
Magnetic valves, vacuum chuck, parallel lines groove.
I/O switch over Module, Air controller.
Double-acting cylinder (flow control valve, magnetic
sensors),
Work piece sensors: fiber optic sensor -Place sensors:
fiber optic sensor, 5/2 WAY single acting solenoid valve
Technical Parameter ,
B. Testing Station: -Learning contents:
Materials sorting
Air testing -Height testing
Linear potentiometer property
A/D converter ,
Cylinder speed adjustment and positioning
Cylinder rotational angle adjustment ,
Sensor applications ,
Industrial safety,
Main component:
Structural composition: basal plate, electric control
cabinet, PLC hung box, Operation panel, charging
barrel, magnetic valves, vacuum chuck, parallel lines
groove. I/O switch over , Module, Air controller. Rod less
cylinder Work piece height detect module Technical
Parameter , Control cabinet main circuit power supply:
single phase, AC220V ± 10% 50Hz;
Control cabinet power supply control loop: DC24V
-Temperature: -10 ~ 40 ; -Environmental humidity: ≤
90% (25 );
Dimensions: length × width × height : = 500mm ×
800mm × 1320mm , Air supply pressure: 0.5 ~ 0.6Mpa
Learning contents:
Rotary index table positioning,
Stepper motor driving, -Worm and gear mechanism ,
-PLC programming ,
Drilling and clamping control ,
Drill hole checking ,
Cylinder speed adjustment and positioning ,
Pneumatic control circuits
Main component:
Structural composition: basal plate, electric control
cabinet, Operation panel, charging
barrel, magnetic valves, vacuum chuck, parallel lines
groove. I/O switch over Module, Air controller.
DC Gear Motor ,
Use motor Control Relay -90 ° detection sensor
Technical Parameter,
Work Principle: Capacitance sensor confirm the work
piece r each to turntable, then turntable rotate 90
degrees to the work piece brought to the appropriate
processing location.
Control cabinet main circuit power supply: single phase
AC220V ± 10% 50Hz;
-control cabinet power supply control loop: DC24V
-temperature: -10 ~ 40 ;
Environmental humidity: ≤ 90% (25 ); -Air supply pressure: 0.5 ~ 0.6Mpa-weight: Approximatel
C. Handling Station:
Main component:
Structural composition: basal plate, electric control
cabinet, , Operation panel, charging
barrel, magnetic valves, vacuum chuck, parallel lines
groove. I/O switch over Module, Air controller. Lift cylinder 2 axis Out cylinder Technical Parameter, Work Principle: Pneumatic finger suck the work piece from the
previous station, then transmitted to the next (assembly
station).
– control cabinet main circuit power supply: single
phase AC220V ± 10% 50Hz;
-control cabinet power supply control loop: DC24V
-temperature: -10 ~ 40 ;
D. Assembly Station: Main component
– Structural composition: basal plate, electriccontrol
cabinet, Operation panel, charging
barrel, magnetic valves, vacuum chuck, parallel lines
groove. I/O switch over Module, Air controller.-Double-acting cylinder (magnetic switch device with
location) ,
-5/2 way single acting solenoid valve
– Capacitive sensor Technical Parameter
– Work Principle: Assembly and extrusion work piece
transferred from the previous station, next station
take the work piece.
-control cabinet main circuit power supply: single
phase AC220V ± 10% 50Hz;
-control cabinet power supply control loop: DC24V
-temperature: -10 ~ 40
E. Storage & HMI Monitoring Station:
Main component
Structural composition: basal plate, electric control
cabinet, Operation panel, charging
barrel, magnetic valves, vacuum chuck, parallel lines
groove. I/O switch over Module, Air controller.
Double-acting cylinder (magnetic switch device with
location) ,
5/2 way single acting solenoid valve
Capacitive sensor Technical Parameter
Work Principle: Assembly and extrusion work piece
transferred from the previous station, next station
take the work piece.
Control cabinet main circuit power supply:
Single phase AC220V ± 10% 50Hz; -control cabinet
power supply control loop: DC24V -temperature:
-10 ~ 40
With 6 stations modular production system,
mechatronics training includes
distributing testing,
processing, handling, assembly and storing,
stations that can be operated separately or
integrally.
The modular production systems allow varying
simulation of real production processes that exist in
industry field.
Accessories :
1 set of courseware
1 set of work piece
(Four kind of different work pieces)
1 set of matching part
12 pieces of 25-pin data cable
1 set of PLC software CD
Connecting Wire: 1 set.
Power Cord.
2mm or 4mm safety Jack: 1 set.
User Manual: 1 Set
Others :
Product Origin: China, Taiwan, Japan
Manufacturing: Assemble in Bangladesh
Installation
Training
Warranty: 01 year
