Description

Stepping Motor Linear Control
Trainer/Stepper Motor Control Trainer

Technical Specification  (Category – 1) : 

This unit is a stepping motor based linear motion control
system, which covers basic application for programmable
logic controller, stepping motor control technology and
sensor technology

It used as a separated demonstration unit with an existing-
PLC system or programming unit.

It used as a separated demonstration unit with a PLC system
or programming unit
Experiments to be Performed:
Stepping motor and driver
Stepping motor rotary encoder positioning
Proximity sensor and rotary encoder
Stepping motor positioning
Stepping motor proximity sensor positioning
Configuration:
Linear motion mechanism:
Stepping motor and driver: input 18?48VDC, max.4.2A,
resolution 0.1A, subdivision 400,25600ppr.- Ball screw:

effective travel 310mm, lead 4mm- Rotary encoder: Incre-
mental, Resolution 720P/R, 40-dia., 5 to 24 VDC, NPN open

collector, Pre-wired models- Proximity sensor x3: DC 6-36V,
detection distance 2mm,three-wire NPN NO.- Limit switch:
quantity 2- Mounting frame: aluminium profile for ball screw
and proximity sensor
Power supply unit: AC 220V socket input, with three way
DC24V output and short circuit protection
Indicators and buttons: running, reset and stop indicators and
buttons with 2mm sockets
Dial switch: 2-bit with 8421BCD
Experiment box and panel: Complete frame made of groove

daluminium profile, detachable upper cover with transparent
design, thepanel adopts engraved and printed panel
Cable suite: 2mm, conductor cross section: 0.5 mm2 SR wire,
500VCATII, with axial socket
Manual: programming and wiring sample are provided,
together withschematic diagrams.
PLC Unit:
SIMATIC S7-200 SMART with 12input/ 8 output
Transistor type
Power supply for PLC: 24VDC
Programming languages STL/LAD/FBD
Ethernet / RS485communication and an additional serial port
With power cord, programming software and cable
Dimensions:250*165*90mm.
Push type rotary lockers

Accessories

4mm safety Jack : 1 set
User Manual: 1 Nos

Others :

Parts Origin: China,Taiwan, Japan
Manufacturing: Assemble in Bangladesh
Installation, Training
Warranty: 01 year

Technical Specification  (Category – 2) : 

Front Panel: Insulating material with silk screen printed diagram of the
different circuit blocks of the module and electrical diagram of each
circuit.
Connections and Measurements: Terminals for connections and measurements.
Container: Metal container.
Stepper Motor:
Goniometric indicator with marks for the angular position.
Characteristics:
Number of phases: 4
Steps: 200 steps/rev
Angle: 1.8° / 0.9°
Max. torque: 850 g·cm
Manual Operation: Manual clock operation with pushbutton; inner clock
generator.
Switching: Unipolar/bipolar, half step/full step switching with
microswitches.
Power Drivers: 4 power drivers with LED indication of the current
direction in the phases.
Step Display: 8-LED display of the number of steps performed by the
motor, in decimal noting
Connection Cable: Module to external unit type 8-pole DIN 270.
Supplied Voltages
Output S1: +30 Vdc, 4A Rectified, filtered voltage protected with fuse.
Voltage indicator LED.
Output S2: 24 Vac, 4A, protected with fuse. Voltage indicator LED.
Output S3: +5 Vdc, 2A
Output S4: +12 Vdc, 2A; -12 Vdc, 1A, regulated voltage,
electronically protected from short circuits and overloads.
Voltage indicator LED.
Output S5: 1.3 Vdc, 24 Vdc, 1A, regulated voltage, electronically protected from short circuits and overloads. Voltage indicator
LED.
Output on DIN Connector: 24 Vac, 0, 24 Vac, 0.5A, voltage
protected with fuse.

Accessories

4mm safety Jack : 1 set
User Manual: 1 Nos

Others :

Parts Origin: China,Taiwan, Japan
Manufacturing: Assemble in Bangladesh
Installation, Training
Warranty: 01 year

Specifications (Category – 3) :

Experiment Modules:
Generally, use 2mm plugs and sockets connected
by 2mm or 4mm test leads Circuits,
blocks and components symbols printed on
the surface of each module.
Module secured in plastic housing,
modules to standard DIN A4 equivalent height
Cabinet provides easy to store facilities for all modules
comprehensive experiment Manuals Power Supply Unit.
-ACV Output voltage measurement
-DCV output voltage measurement Meter/Motor Unit
-Dual scale ACA
-Dual Scale ACA
Isolation Transformer : AC 110V/220V

A. Power Supply Unit Experiments
-AC voltage measurement
-DC voltage measurement List of Modules:
B. UJT Experiments
-UJT introduction
-UJT Characteristic
–UJT equivalent circuit
-CDS trigger, RTH trigger
UJT Oscillator Circuit & Timer Switch
-UJT relaxation oscillator
-UJT timer switch
C. PUT Experiments
PUT Characteristic & Equivalent Circuit
-PUT introduction
-PUT Characteristic
-PUT equivalent Circuit
-CDS trigger
-RTH trigger

PUT Oscillator Circuit & Timer Switch
-PUT Circuit oscillator
-PUT timer switch D. PUT & SCR Experiments
PUT Staircase Generator & Voltage Control Ramp
Circuit
-PUT staircase generator circuit
-PUT voltage control ramp circuit
SCR Characteristic & RC Shift Control Circuit
-SCR Principle
-SCR characteristic curve
-SCR Construction
-SCR trigger mode
-SCR RC phase control Circuit
E. SCS Experiments
SCS Characteristic Experiment
-SCS construction and operation mode
-Use a VOM meter measuring SCS
-SCS Schmitt circuit
-SCS simulates PUT Circuit

IC Timer Switch Experiment
– NE 555 IC circuit introduction
– IC timer switch experiment
– Digital Signal Drive &
Zero-Voltage Switch Experiments

SCS Trigger Circuit Experiment
-CDS trigger
– RTH trigger F. UJT & PUT Trigger
SCR Experiment
UJT Trigger SCR Phase Control Circuit
– Phase control basic circuit
– Phase control analysis
– AC phase control circuit analysis
– UJT trigger SCR Phase control circuit
PUT Trigger SCR Phase Control Circuit
G. SCR Control DC Motor & DIAC, TRIAC SCR
Characteristic Experiments SCR Control DC Motor
Forward/Reverse Experiment
– SCR Cut-off principle
– SCR control DC motor

Forward / reverse control experiment
DIAC, TRIAC
Characteristic Experiment
– DIAC construction and characteristic
– DIAC operation mode and measurement
– TRIAC construction and characteristic
– TRIAC trigger mode
– TRIAC static measurement
H. Automatic Control Lamp,
TRIAC Control Speed Experiments
Automatic Control Lamp Experiment
– TRIAC shift control
– TRIAC automatic control lamp experiment

TRIAC Control Motor Speed Experiment
– Different motor introduction
– TRIAC control motor speed experiment
– Temperature Ratio, Photo-Couple and Touch
control Experiments
Bridge Temperature Ratio Control Experiment
– Electronic component of thermal resistor
– SCR bridge temperature ratio control experiment
Photo-Couple and Touch Control Experiment
– Photo couple control circuit
– FET construction and characteristic
– Touch alarm circuit

J. Over / Under Voltage Breaker and Flasher
Control Experiments Over /Under Voltage Breaker Experiment
-OPA characteristic with reverse & non-reverse circuit
– Voltage comparison circuit
Flasher Control Experiment
-Application of TRIAC power control
– AC circuit control
– Multi vibrator

K. TRIAC Liquid Level & IC
Timer Switch Experiments
TRIAC Liquid Level Control Experiment
– Digital circuit introduction
– TRIAC liquid level control experiment

Digital Signal Driver Control Experiment
Digital Signal driver control experiment
Zero-Voltage Switch Experiments
-Ideal half-wave zero-voltage switch experiments
-M. Zero-Voltage Switch Experiments

Zero-Voltage Switch Experiments
– TRIAC zero-voltage switch experiments
– IC mode zero-voltage switch experiments
N. SCR Converter Experiments
– Parallel converter introduction
– Series converter introduction
– Converter output- wave form improvement

O. SCR Rectifier Circuit Experiments:
– Single-phase half wave rectifier
– Single-phase full-wave rectifier
– Single-phase bridge rectifier
– Three-phase half wave rectifier
– Three-phase full-wave rectifier

P. JFET / MOSFET Characteristic & MOSFET
Speed Control Experiments:
– JFET characteristic experiment
– MOSFET characteristic experiment
– OSFET speed control experiment

Q. IGBT Characteristic & IGBT Speed Control Experiments
– IGBT characteristic experiment
– IGBT speed control experiment Accessories
Experiment Manual, Tank-2pcs.
Connection Plugs- 1 set
Storage Cabinet 2 Sets
Rack : With Necessary

Stepper Motor Control Trainer’s Accessories:

4mm safety Jack : 1 set
User Manual: 1 Nos

Stepper Motor Control Trainer Others Information:

Brand: FaboTronix
Country of Origin: China
Manufacturing: Assemble in Bangladesh
Training
Warranty: 1 Year