Description

Universal Adriano Microcontroller Trainer

Technical Specification :

Best type Printed Sheet
Hard Round support board or Plastic Sheet • Safety Breaker.
Protection System , Panel Box , Best structure.
Power Monitoring ,Use Connector
Working area:
Support System: Windows XP / Win 7 / Win 8 / Win 10 / Win 11/
Linux
Working area: 22.86 *20.32*4 cm
Frame size: 76.2 * 62.23 *4 cm
Arduino UNO Unit:
Microcontroller:
ATmega328P – 8 bit AVR family microcontroller
Operating Voltage :5V
Recommended Input Voltage :7-12V
Input Voltage Limits :6-20V
Analog Input Pins :6 (A0 – A5)
Digital I/O Pins :14 (Out of which 6 provide PWM output)
DC Current on I/O Pins :40 mA
DC Current on 3.3V Pin :50 mA
Flash Memory :32 KB (0.5 KB is used for Bootloader)
SRAM :2 KB
EEPROM :1 KB • Frequency (Clock Speed) :16 MHz

ARDUINO PRO MINI Unit:
• Microcontroller: Atmega 328p – 8 BIT AVR controller
• Operating Voltage :5V and 3.3V
• Raw Voltage input :5V to 12V
• Maximum current through each I/O pin :40mA
• Maximum total current drawn from chip :200mA
• Flash Memory :32KBytes • EEPROM :1KByte
• Internal RAM :2Kbytes
• Clock Frequency :3.3V — 8Mhz :5V — 16Mhz
• Operating Temperature: -40ºC to +105ºC
Arduino Nano Unit:
• Microcontroller :ATmega328P – 8-bit AVR family microcontroller
• Operating Voltage :5V
• Recommended Input Voltage for Vin pin :7-12V
• Analog Input Pins :6 (A0 – A5)
• Digital I/O Pins :14 (Out of which 6 provide PWM output)
• DC Current on I/O Pins :40 mA
• DC Current on 3.3V Pin :50 mA
• Flash Memory :32 KB (2 KB is used for Bootloader)
• SRAM :2 KB , EEPROM :1 KB
• Frequency (Clock Speed) :16 MHz

Arduino Mega Unit:
86 programmable IO lines
Two 8-bit timer/counters, four 16-bit timer/counters
16-channel 10-bit ADC , Four USART , SPI serial interface
On-chip analog comparator
NodeMCU ESP8266 Unit:
Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
Operating Voltage: 3.3V • Input Voltage: 7-12V
Digital I/O Pins (DIO): 16 • Analog Input Pins (ADC): 1
UARTs: 1 , SPIs: 1 , I2Cs: 1
Flash Memory: 4 MB , SRAM: 64 KB , Clock Speed: 80 MHz
USB-TTL based on CP2102 is included onboard,
Enabling Plug n Play
PCB Antenna
Small Sized module to fit smartly inside your IoT projects
Arduino Micro Unit:
86 programmable IO lines
Two 8-bit timer/counters, four 16-bit timer/counters
16-channel 10-bit ADC , Four USART , SPI serial interface
On-chip analog comparator
Node MCU ESP32 Unit:
Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
Operating Voltage: 3.3V , Input Voltage: 7-12V
Digital I/O Pins (DIO): 16
Analog Input Pins (ADC): 1
UARTs: 1 , SPIs: 1 , I2Cs: 1, Flash Memory: 4 MB , SRAM: 64 KB
Clock Speed: 80 MHz ,
USB-TTL based on CP2102 is included onboard, Enabling Plug n
Play , PCB Antenna
Small Sized module to fit smartly inside your IoT projects
Node MCU ESP-01/LORA Unit:
Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
Operating Voltage: 3.3V , Input Voltage: 7-12V
Digital I/O Pins (DIO): 16 , Analog Input Pins (ADC): 1
UARTs: 1 , SPIs: 1 , I2Cs: 1 , Flash Memory: 4 MB , SRAM: 64 KB
Clock Speed: 80 MHz
USB-TTL based on CP2102 is included onboard, Enabling Plug n
Play •, PCB Antenna
Small Sized module to fit smartly inside your IoT projects
Additional Modules Unit:
1.2 inch 7 Segment LED Display , 8*8 Dot matrix , keyboard
interface , 32 pin I/O line interface , On board Driver L293 of DC
motor interface , Stepper Motor Driver , LCD 2×16 interface board
(optional) , LED Bar graph 10 , Interrupt and reset futures
Built In-Power supply 5V/5A (AC 220V)
Included Timer Module , Serial Controller Connected
Direct I/O to PC interface with USB , I2C communication
Pulse with Modulation
ADC with 16-bit resolution
RTC(DS3231) with temperature module
GSM SIM800L with Buck Module , Multiplexing 7Seg 4digit
Wireless Experiment (NRF, Bluetooth, MCU-ESP)
Ultrasonic Module interface
RF433MHz transceiver
2Channel Electromagnetic switch module
Infrared Communication Module
Signal switch module (PNP & NPN)

Comparator experiment module
Built Programmer/Burner
High current switch module using ULN series
FT232RL USB TO TTL Converter/Programmer Unit:
Operating Voltage: 5V/3.3V DC
Max Current Draw: 5V – 500mA; 3.3V – 50mA
Connector: Mini USB
Fully integrated 1024bit EEPROM storing device descriptors and
CBUS I/O configuration
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485,
RS232) at TTL levels
128 byte receive buffer and 256 bytes transmit buffer
Transmit and receive LED drive signals
Fully integrated clock generation with no external crystal required

Accessories : 
Standard accessories.
User manual: 1 Nos.
Connecting Wire: 1 set

Others :
Origin Parts : China, Taiwan, Japan.
Manufacturing in Bangladesh.
Warranty: 01 year.
Installation, Testing.
Training.