Description

Basic Electrical trainer with experiment module

Features:

List of Experiments
Module-1: Ohm’s Law
Series circuit of resistance
Parallel circuit of resistance
Series-parallel circuit of resistance

Module-2: Kirchhoff’s Law
Kirchhoff’s Law of Voltage
Kirchhoff’s Law of Current

Module-3: Law of Distribution
Law of Voltage Distribution

Module-4: Maximum Power Delivery
Maximum Power Delivery Conditions

Module-5: Thevenin and Norton’s Theorem
Thevenin’s Theorem
Norton’s Theorem

Module-6: Principle of Superposition
Understanding circuit analysis method when there are two or
more current and voltage sources

Module-7: Loop, Node Method
Understanding loop and node equations with independent
voltage and current sources
Module-8: RC Series, Parallel Circuit
1. Understanding Current Voltage Characteristics of RC Series
Circuits
2. Understanding Current Voltage Characteristics of RC Parallel
Circuits

Module-9: RL Series, Parallel Circuit
1. Understanding current voltage characteristics of RL series
circuits
2. Understanding current voltage characteristics of RL series
circuits

Module-10: RLC Series, Parallel Circuit
Understanding RLC Series and Parallel Circuits in AC
Understanding the resonance characteristics of RLC series and
parallel circuits

Module-11: Diode
1. Understanding how diodes work
2. Understand voltage-current characteristics of diodes
3. Understanding the Voltage-Current Characteristics of Zener
Diodes

Module-12: Clipper, Clamper
1. Understand the operation of series and parallel clippers and
biased clippers
2. Understanding clamper circuits according to diode
direction

Module-13: Rectifier Circuit
1. Understanding of Half-wave Rectifier
2. Understanding of Full-wave Rectifier
3. Understanding of Bridge Full-wave Rectifier
FilterUnderstanding circuits of Low Pass and High Pass Filters
Understanding circuits of Band Pass and Band Stop Filters

Hardware Specifications
Input Parts
AC Power
0VAC, 3VAC, 6VAC, 9VAC, 12VAC
3 digit 7-Segment Display (Selected AC Power)
Variable DC Power-1
+1.5V ~ +18.5V
3 digit 7-Segment Display (Output DC Power)
Variable DC Power-2
-1.5V ~ -18.5V
3 digit 7-Segment Display (Output DC Power)

Analog Signal
+5V ~ -5V
Fixed Power (DC)
+20V, +15V, +5V, GND, -5V, -15V
Slide Switch
+15V/0V Switch 2EA
+5V/0V Switch 2EA
5V/0V Switch 2EA
-15V/0V Switch 2EA

Button Switch
+15V/0V Switch 1EA
+5V/0V Switch 1EA
5V/0V Switch 1EA
-15V/0V Switch 1EA
Function Generator
Waveform: Sine / Triangle / Square
DC Offset: -5V ~ +5V
Amplitude: 0V ~ 10Vp-p
Frequency:
0 ~ 1kHz
1kHz ~ 10kHz
10kHz ~ 100kHz
Duty Rate: 10 ~ 90% (Square)
Output Level: +5V TTL Level
Fixed Frequency
Output Level: +5V TTL Level
Frequency: 0.5Hz, 1Hz, 50Hz, 100Hz, 500Hz, 1kHz, 5kHz,
10kHz

Passive Components
Variable Resistor: 1k 1EA, 5k 1EA, 10k 1EA, 50k 1EA
Select Capacitor: 100pF, 1nF, 10nF, 47nF, 100nF, 1uF
Select Inductor: 47uH, 100uH, 220uH, 470uH, 1mH, 2.2mH

Output Parts
LED display: 5pi RED LED 8EA
7-Segment Display:
Anode Common 7-Segment 1EA
Cathode Common 7-Segment 1EA
Speaker: 4 Speaker with Volume Control

Measurement Parts
Oscilloscope
Using PC Software (USB Cable connected)
Display: 2.8inch 64K Color TFT LCD
Resolution: 320 × 240 Pixels
Sampling Speed: 250MHz (single ch), 125MHz (dual ch)
Band Width: 70Msps/ch
Measurement Range: -30V ~ +30V
Voltage Division: 10mV ~ 10V
Record Length:
Max 6K samples for single-channel
3K samples per dual-channel
SEC/DIV Range: 5ns/div ~ 500s/div (1, 2, 5 sequence)
DC Gain Accuracy: ±3% for Normal or Average acquisition mode

Multi-Tester
Maximum Resolution: 4000 Counts
AC/DC Voltage: Up to 600V
AC/DC Current: Up to 10A
Resistance: Up to 40M
Capacitance: Up to 100uF
Diode: 0 ~ 1V
Testing Modes: Voltage, Current, Resistance, Diode, Capacitance
Measurement Block
Display: 3 digit 7-Segment display
Measure Select: Voltage / Ampere / Frequency
Voltage measure: 0 ~ 30V
Ampere measure: 0 ~ 9.99A
Frequency measure: 0Hz ~ 5MHz
Display unit using LED

DAQ
Using PC Software (USB Cable connected)
Sampling Speed: 1ms, 10ms, 100ms, 1s
Input: 8 bit digital Data
Output: 8 bit TTL Level
Waveform Generator: A/D Convertor with 8 bit output data

Power Protection Circuit
1. If the circuit uses more than the allowable current for short circuit
reasons, shutoff the power
2. When the temperature inside the equipment is over a certain
temperature (70), the power is cut off
3. Beep sound when power off
4. LED indicates the location of the power source that is problematic
when the power is off
5. LED informs the status of power connection / operation / short
6. Power can be switched on/off using a switch

Accessories
Connecting Wire: 1 set
Standard Accessories

Others:

Brand: FaboTronix
Country of Origin: China, taiwan, japan.
Manufacturing: Assemble in Bangladesh
Training