Description

Electronics Module Package for Smart Trainer

Specifications :

1) DC Circuit
• Ohm’s Law
• Kirchhoff’s Law
• Series/parallel circuit
• Galvanometer
• Wheatstone Bridge

2) Measurement
• DC voltmeter
• DC ammeter
• Ohm meter
• V, A, R indicator

3) AC Circuit
• Capacitance circuit
• Inductance circuit
• RC/RI. circuit
• LC resonance circuit (series/parallel)

4) Transformer
• Auto transformer
• Transformer load
• Transformer turn ratio
• Input voltage and output voltage

5) Semiconductor-1
• Characteristics of diode
• Zener diode
• NPN transistor
• PNP transistor

6) Semiconductor-2
• J-FET characteristics
• MOS-FET characteristics
• SCR characteristics
• TRIAC characteristics
• Common emitter amplifier

7) Transistor amplifier
• Complementary amplifier
• Darlington amplifier
• Amplifier Biasing

8) OP AMP
• Differential amplifier
• Non-inverting amplifier
• Inverting amplifier
• OP AMP offset

9) Active filter
• Band pass filter
• Law pass filter
• High pass filter

10) Regulated power supply
• Voltage regulator
• Bridge rectifier
• Variable V-regulator (OP AMP)
• Variable V-regulator (Transistor)

11) Oscillator
• Crystal oscillator
• Colpitts oscillator
• Hartley oscillator
• Wien bridge oscillator
• Phase shift oscillator

12) Pulse circuit
• Clipper circuit
• Schmitt trigger
• Bistable multivibrator
• Monostable multivibrator

13) Digital logic
• Diode logic
• AND gate (CMOS)
• OR/XOR gate (CMOS)
• Inverter (CMOS)

14) Sequential logic
• JK flip-flop (TTL)
• RS flip-flop (TTL)
• Counter (TTL)
• Shift register (TTL)

15) Combination logic
• Decoder (TTL)
• Encoder (TTL)
• Half adder/Full adder (TTL)
• Multiplexer/De-multiplexer (CMOS)

16) Signal converter
• A/D converter
• D/A converter
• F/V converter
• V/F converter

Frequency Counter

Introduction

This Frequency Counter is a high-precision measurement instrument designed to measure signals from 0.1Hz up to 3GHz with A/C input capability. It features a 0.56-inch, 9-digit green display supporting multiple unit indicators including Hz, kHz, MHz, nS, μS, mS, S, and more. With selectable gate times (0.01–10 sec), dual input types (A & C), wide sensitivity range, and stable 10MHz internal time base, the device ensures accurate frequency analysis. Built with reliable impedance design and measurement stability, it supports cycle measurement, cumulative count analysis, and offers a compact form factor of 240×270×90mm, suitable for laboratory and professional electronic testing applications

Specifications :

Measurement range (Min):
• 0.1Hz~3GHz (A/C input)

Display:
• Display at least 0.56 inches & 9 digits (green color)
• Display: Overflow, Gate Time, mHz, Hz, kHz, MHz, nS, uS, mS, S, Hold

Range:
• 0.11Hz to 100MHz (A input) and 80MHz–1.5GHz (C input)

Gate Time:
• 0.01 sec./0.1 sec./1 sec./10 sec

Resolution:
• InlHz-101 Hz or better

Type of input:
• A and C

Sensitivity:
• A input: 30mVrms
• C input: 80MHz~1.0GHz: 35mV
• 1.1GHz-1.5GHz: 70mV

Impedance:
• A input: 1M <40pF
• C input: 50pF

Input A Mode:
Cycle:
• Range: 10m sec.-10 sec.; Resolution: Ips Ins;

Accuracy:
• Resolution Trigger Error 1 Count

Cumulative factor:
• Range: 5Hz-10MHz; Maximum number display: 0 to 99999999 (Max.)

Internal Time Base:
• Frequency: 10MHz
• Aging rate: <5 x 10-6

Temp. Stability:
• 5 x 10-6 (0°C~+50°C)

Line voltage:
• <1 x 10-6 (in case of a change by 10%)

Dimension (Min):
• 240(W) x 270(D) x 90(H) mm

Accessories:

Single-phase power cord
4mm Banana Socket-1Set
User Manual

Others:

Brand: FaboTronix
Country of Origin: China, taiwan, japan.
Manufacturing: Assemble in Bangladesh
Training